Devilbiss Air Compressors Power Air Tools Using AccessoriesThe DeVilbiss Air Power Company based in Jackson, Tennessee, manufactures the Devilbiss air compressors, air tools, and certain accessories. It manufactures 4 models of Devilbiss air compressors, namely the E7540, the EXFAC200, the EXFAC2080, and the EXFAC23. The E7540 is a 175 psi, 2-stage oil-lubricated twin-v cast iron stationary rigid compressor with an ASME (American Society of Mechanical Engineers) tank capacity of 80 gallons. It provides high air delivery at a running power of only 6 HP. It is suitable for multi-tool usage on a continuous basis. It also allows a quick compressor recovery time. The compressor is equipped with long-life connecting rods, pistons, and piston rings. A sight glass helps easy readability of the oil level. Thermal overload protection is included for easy restarting of the 240 volt capacitor-start induction motor. The EXFAC2080 is a 125 psi portable compressor unit with its 120V drive motor taking in a current of 2.6 amperes to deliver 90 standard cubic feet per minute (SCFM) of air. The motor, which has replaceable brushes has automatic thermal overload protection and is built for long life. It has switches for start/stop operation. The noise rating of the compressor unit is 87 dBA. The unit features an 8 gallon tank that is capable of providing air continuously for heavy duty stapling and nailing application. The compressor is an oil-free design for almost no maintenance and durability. The standard equipment includes the compressor, the air regulators, the ASME safety valve, gauges, and operating manual. The EXFAC23 is also a portable compressor with almost the same features and specifications as the EXFAC2080, but has a smaller tank of 3 gallons. It is known as the Hotdog. The 4th model in the Devilbiss air compressor range is the EXFAC200 tankless design. It is a compact portable unit rated for 125 psi and its motor draws 2.6 amperes of current. It is a fully sealed unit without any drains. Besides the above four air compressor models, the Devilbiss Air Power Company also manufactures a substantial range of air tool models. Under the ES series of air tools it features 4 models, namely the ES1, ES2, ES3, and the ES4. Under the ET series it makes the ET501 and ET502. It also makes the ETD381, the ETG1, the ETS3, the ETX1, the ETR381 and the kits ESK20, the ETK20, the ETK30, and the ETX3. Its air tools range is completed by the ETS1. This last is a 6" pad dual action sander that operates at the high speed of 10,000 RPM. Devilbiss also manufactures several accessories that are used with the above air compressors and air tools. The EAX4 is a one-fourth inch female tire chuck. The EAX5 is a 6" dual head tire chuck. The EAX7 is a tire inflator. It is equipped with a gauge. The EH251 is a one-fourth inch by 25" recoil hose. The EH382 is a three-eighth inch by 50" long PVC air hose. Devilbiss air compressors power the Devilbiss air tools using the above accessories. They are used for tire inflation, nailing, stapling, and sanding. Get The Best Deals On Air compressor Models and Parts At Our Store |
